Difference between revisions of "Cisco IOS command's equivalent in JUNOS"

From Tech-Wiki
Jump to: navigation, search
Line 18: Line 18:
 
|reload at 10:15 11 Apr
 
|reload at 10:15 11 Apr
 
|request system reboot at 2004111015 / 10:15 / now
 
|request system reboot at 2004111015 / 10:15 / now
 +
|-
 +
|reload
 +
|request system reboot
 
|-
 
|-
 
|show clock
 
|show clock
Line 36: Line 39:
 
|show running-config
 
|show running-config
 
|show configuration / display set
 
|show configuration / display set
 +
|-
 +
|erase running-config
 +
|delete or request system zeroize
 
|-
 
|-
 
|show tech-support
 
|show tech-support
Line 78: Line 84:
 
|show cdp neighbors
 
|show cdp neighbors
 
|show lldp neighbors
 
|show lldp neighbors
|-
 
|reload
 
|request system reboot
 
 
|-
 
|-
 
|terminal length 0
 
|terminal length 0

Revision as of 16:49, 19 April 2021


Essentials JUNOS commands and its IOS counterpart

Table 1. JUNOS Commands
Cisco Command JUNOS Equivalent
ping address ping address rapid
enable configure
reload at 10:15 11 Apr request system reboot at 2004111015 / 10:15 / now
reload request system reboot
show clock show system uptime
clock set set date
show environment show chassis environment
show ip traffic show system statistics
show processes cpu show system processes extensive
show running-config show configuration / display set
erase running-config delete or request system zeroize
show tech-support request support information
show ip interface brief show interfaces terse
show ip route show route
write memory commit
show route-map show policy
clear counters clear interface statistics
sh ip arp / inc 10.0.0.1 show arp no-resolve / find 10.0.0.1
sh mac address-table / inc 0014.ff00 show ethernet-switching table / match 00:14:ff:00
clear arp-cache clear arp
show ip bgp show route protocol bgp
show ip bgp neighbors address advertised-routes show route advertising-protocol bgp address
show ip bgp regexp show route aspath-regex
clear ip bgp clear bgp neighbour
show cdp neighbors show lldp neighbors
terminal length 0 set cli screen-length 0
terminal monitor monitor start messages
terminal no monitor monitor stop
write erase / erase startup-config load factory-default
enable password set system root-authentication plain-text-password
ip address 172.16.1.1 255.255.255.0 set interfaces ge-1/2/0 unit 0 family inet address 172.16.1.1/24
ip route 10.0.0.0 255.0.0.0 172.16.1.2 set routing-options static route 10.0.0.0/8 next-hop 172.16.1.2