Enable users for SCP

From Tech-Wiki
Revision as of 08:08, 28 September 2011 by Linogenco (Talk | contribs) (Created page with "Category:Check Point To enable users to SCP to a SecurePlatform device you will need to edit the <b>/etc/scpusers</b> file. <br /> <br /> The can be achieved using the follo...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


To enable users to SCP to a SecurePlatform device you will need to edit the /etc/scpusers file.

The can be achieved using the following steps:

  1. Enter the Expert mode.
  2. Create the /etc/scpusers file.
  3. Open the scpusers file with a text editor such as vi.
  4. Add all authorized users, list one per line.


Note: Only users listed in this file will be allowed to use scp.

Note: You can also run the following command instead of steps 2-4. 

"echo <username> >> /etc/scpusers"
Retrieved from ‘http://tech-wiki.net/index.php?title=Enable_users_for_SCP&oldid=242’