Difference between revisions of "Enabling SNMP/email alerts"
From Tech-Wiki
(Created page with "Category:F5 Networks '''Back to Misc''' # Log in to the Traffic Management Shell (tmsh) by typing the following command: tmsh # To configure the sy...") |
|||
| Line 3: | Line 3: | ||
# Log in to the Traffic Management Shell (tmsh) by typing the following command: | # Log in to the Traffic Management Shell (tmsh) by typing the following command: | ||
| − | tmsh | + | tmsh |
# To configure the system to send locally generated email messages, use the following command syntax: | # To configure the system to send locally generated email messages, use the following command syntax: | ||
| − | modify /sys outbound-smtp mailhub <mail_server>:<port> | + | modify /sys outbound-smtp mailhub <mail_server>:<port> |
| − | + | # To save the configuration, type the following command: | |
| − | save /sys config | + | save /sys config |
| − | + | #Optional: If the SMTP mail host supports Secure Sockets Layer (SSL)/TLS authentication but does not establish a secure connection automatically, you must add the following four additional parameters into the /etc/ssmtp/ssmtp.conf configuration file: | |
| − | UseSTARTTLS=yes | + | UseSTARTTLS=yes |
UseTLS=yes | UseTLS=yes | ||
AuthUser=<SMTP-Account-Username> | AuthUser=<SMTP-Account-Username> | ||
AuthPass=<SMTP-Account-Password> | AuthPass=<SMTP-Account-Password> | ||
| − | + | #Verify that ssmtp is configured properly and can send an email message: | |
echo "ssmtp test mail" | mail -vs "Test email" [email protected] | echo "ssmtp test mail" | mail -vs "Test email" [email protected] | ||
Revision as of 18:27, 14 May 2018
- Log in to the Traffic Management Shell (tmsh) by typing the following command:
tmsh
- To configure the system to send locally generated email messages, use the following command syntax:
modify /sys outbound-smtp mailhub <mail_server>:<port>
- To save the configuration, type the following command:
save /sys config
- Optional: If the SMTP mail host supports Secure Sockets Layer (SSL)/TLS authentication but does not establish a secure connection automatically, you must add the following four additional parameters into the /etc/ssmtp/ssmtp.conf configuration file:
UseSTARTTLS=yes UseTLS=yes AuthUser=<SMTP-Account-Username> AuthPass=<SMTP-Account-Password>
- Verify that ssmtp is configured properly and can send an email message:
echo "ssmtp test mail" | mail -vs "Test email" [email protected]
8.To modify the permissions on the user_alert.conf file to include write access, type the following command:
chmod 644 /config/user_alert.conf
alert BIGIP_SHELL_BP_CONFIGURATION_LOADED {
snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.28"; email toaddress="[email protected]" fromaddress="root" body="New configuration loaded" }
alert BIGIP_MCPD_MCPDERR_POOL_MEMBER_MON_DOWN "Pool (.*?) member (.*?):(.*?) monitor status down." {
snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.10"; lcdwarn description="Node down" priority="1" email toaddress="[email protected]" fromaddress="root" body="A pool member went down"
}
alert BIGIP_MCPD_MCPDERR_POOL_MEMBER_MON_UP "Pool (.*?) member (.*?):(.*?) monitor status up." {
snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.11" email toaddress="[email protected]" fromaddress="root" body="A pool member came back up"
}
alert BIGIP_MCPD_MCPDERR_NODE_ADDRESS_MON_DOWN "Node (.*?) monitor status down." {
snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.12"; lcdwarn description="Node address down" priority="1" email toaddress="[email protected]" fromaddress="root" body="A node went down"
}
alert BIGIP_MCPD_MCPDERR_NODE_ADDRESS_MON_UP "Node (.*?) monitor status up." {
snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.13" email toaddress="[email protected]" fromaddress="root" body="A node came up"
}
9.To restore the permissions on the user_alert.conf file, type the following command: chmod 444 /config/user_alert.conf
10.To restart the alertd process, type the following command: tmsh restart /sys service alertd