View source for Listening on both HTTP+HTTPS port

[[Category:F5 Networks]]
'''[[F5 Networks#iRules|Back to iRules]]'''

 when SERVER_CONNECTED { 
  if {[TCP::remote_port] != 443} { 
    SSL::disable 
  } 
 }

Or below

 when RULE_INIT {
    # Requests to ports not defined in either the https or http ports list will be reset
    # Define virtual server ports that should have SSL enabled
    set static::vip_https_port 443
    # Define virtual server ports that should be answered with HTTP
    set static::vip_http_port 80
 }
 when CLIENT_ACCEPTED {
    if { [TCP::local_port] == $static::vip_https_port }{
        # Request was to an HTTPS port, so do nothing for the clientside connection.
        # The defined client and/or server SSL profiles will be applied as normal
        if {[PROFILE::exists clientssl] == 0}{
            reject
        }
    }
    elseif { [TCP::local_port] == $static::vip_http_port }{
        # Request was to an HTTP port, not an HTTPS port, so disable client SSL profile if one is enabled on the VIP
        # Check to see if there is a client SSL profile and if so, disable it
        if { [PROFILE::exists clientssl] == 1} {
            SSL::disable clientside
        }
        # Check to see if there is a server SSL profile and if so, disable it
        if { [PROFILE::exists serverssl] ==1} {
            SSL::disable serverside
        }
    }
    else {
        # Request wasn't to a defined port, so reset the TCP connection.
        reject
   }
 }