Difference between revisions of "Performing an upgrade"
(Created page with "Category:F5 Networks '''Back to Misc''' Upgrade procedure covering HA units reactivate license on System - License - Re-activate test admin/root pas...") |
|||
| Line 2: | Line 2: | ||
'''[[F5 Networks#Misc|Back to Misc]]''' | '''[[F5 Networks#Misc|Back to Misc]]''' | ||
| − | Upgrade procedure covering HA units | + | Upgrade procedure covering HA units: |
| − | reactivate license on System - License - Re-activate | + | '''reactivate''' license on System - License - Re-activate |
test admin/root passwords | test admin/root passwords | ||
Commit/Save configuration | Commit/Save configuration | ||
Revision as of 16:23, 29 March 2021
Upgrade procedure covering HA units:
reactivate license on System - License - Re-activate test admin/root passwords Commit/Save configuration
tmsh save sys config
Save a UCS backup file
tmsh save sys ucs $(echo $HOSTNAME | cut -d'.' -f1)-$(date +%H%M-%m%d%y)
Upload qkview to F5 iHealth Import new software image via System - Software management - Image list Disable ConfigSync
tmsh cm modify device-group <device_group> auto-sync
set the Force Offline option on standby unit Upgrade standby into a new volume (name will be appended to HD name) via System - Software management - Image list - Install Select (activate) the boot location of the newly installed softare as active and reboot standby After boot, unset the Force Offline option Use network failover to make standby as primary
set the Force Offline option on other node Upgrade former primary via System - Software management - Image list - Install Select (activate) the boot location of the newly installed softare as active and reboot standby After boot, unset the Force Offline option unset the Force Offline option