Preventing cluster failover during policy install

From Tech-Wiki

Revision as of 15:05, 22 February 2018 by Fabricio.Lima (Talk | contribs) (Created page with "Category:Check Point '''Back to Gaia''' During policy install, the gateway members may failover due excessive load. To prevent this, add this to $FWD...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Back to Gaia

During policy install, the gateway members may failover due excessive load. To prevent this, add this to $FWDIR/boot/modules/fwkern.conf

fwha_freeze_state_machine_timeout=90

If the error persists, consider proceeding with the suggestions below: Ensure that the cluster_id is set properly on each member

cphaconf cluster_id get

Add those values to $FWDIR/boot/modules/fwkern.conf

fwha_monitor_if_link_state=1
fwha_wait_probing_link_up=15
fwha_timer_cpha_res=10

Retrieved from ‘http://tech-wiki.net/index.php?title=Preventing_cluster_failover_during_policy_install&oldid=1112’

Check Point