Cisco IOS to Junos command equivalents
From Tech-Wiki
More actions
(Redirected from Cisco command's equivalent in JUNOS)
Command and operational reference for Cisco IOS to Junos command equivalents.
Commands
Essentials JUNOS commands and its IOS counterpart
| Cisco Command | JUNOS Equivalent |
|---|---|
| ping address | ping address rapid |
| enable | configure |
| reload at 10:15 11 Apr | request system reboot at 2004111015 / 10:15 / now |
| reload | request system reboot |
| show clock | show system uptime |
| show flash | show system storage + file list /var/tmp detail |
| clock set | set date |
| show environment | show chassis environment / show chassis routing-engine |
| show version | show chassis hardware |
| show ip traffic | show system statistics |
| show processes cpu | show system processes extensive |
| show running-config | show configuration / display set |
| erase running-config | delete or request system zeroize |
| show tech-support | request support information |
| show cable-diagnostics tdr ge1 | show diagnostics tdr interface ge-0/0/1 |
| show history | show log interactive-commands |
| show power inline | show power controller |
| show ip interface brief | show interfaces terse |
| show ip route | show route |
| write memory | commit |
| show route-map | show policy |
| clear counters | clear interfaces statistics all |
| sh ip arp | inc 10.0.0.1 | show arp no-resolve | match 10.0.0.1 |
| sh mac address-table | inc 0014.ff00 | show ethernet-switching table | match 00:14:ff:00 |
| clear arp-cache | clear arp |
| show ip bgp | show route protocol bgp |
| show ip bgp neighbors address advertised-routes | show route advertising-protocol bgp address |
| show ip bgp regexp | show route aspath-regex |
| clear ip bgp | clear bgp neighbour |
| show cdp neighbors | show lldp neighbors |
| terminal length 0 | set cli screen-length 0 |
| terminal monitor | monitor start messages |
| terminal no monitor | monitor stop |
| terminal shell | start shell |
| write erase / erase startup-config | load factory-default |
| enable password | set system root-authentication plain-text-password |
| ip address 172.16.1.1 255.255.255.0 | set interfaces ge-1/2/0 unit 0 family inet address 172.16.1.1/24 |
| ip route 10.0.0.0 255.0.0.0 172.16.1.2 | set routing-options static route 10.0.0.0/8 next-hop 172.16.1.2 |