Difference between revisions of "Cisco IOS command's equivalent in JUNOS"

From Tech-Wiki
Jump to: navigation, search
 
Line 76: Line 76:
 
|clear interfaces statistics all
 
|clear interfaces statistics all
 
|-
 
|-
|sh ip arp / inc 10.0.0.1  
+
|sh ip arp <nowiki>|</nowiki> inc 10.0.0.1  
|show arp no-resolve / match 10.0.0.1
+
|show arp no-resolve <nowiki>|</nowiki> match 10.0.0.1
 
|-
 
|-
|sh mac address-table / inc 0014.ff00
+
|sh mac address-table <nowiki>|</nowiki> inc 0014.ff00
|show ethernet-switching table / match 00:14:ff:00
+
|show ethernet-switching table <nowiki>|</nowiki> match 00:14:ff:00
 
|-
 
|-
 
|clear arp-cache
 
|clear arp-cache

Latest revision as of 14:19, 28 August 2023


Essentials JUNOS commands and its IOS counterpart

Table 1. JUNOS Commands
Cisco Command JUNOS Equivalent
ping address ping address rapid
enable configure
reload at 10:15 11 Apr request system reboot at 2004111015 / 10:15 / now
reload request system reboot
show clock show system uptime
show flash show system storage + file list /var/tmp detail
clock set set date
show environment show chassis environment / show chassis routing-engine
show version show chassis hardware
show ip traffic show system statistics
show processes cpu show system processes extensive
show running-config show configuration / display set
erase running-config delete or request system zeroize
show tech-support request support information
show cable-diagnostics tdr ge1 show diagnostics tdr interface ge-0/0/1
show history show log interactive-commands
show power inline show power controller
show ip interface brief show interfaces terse
show ip route show route
write memory commit
show route-map show policy
clear counters clear interfaces statistics all
sh ip arp | inc 10.0.0.1 show arp no-resolve | match 10.0.0.1
sh mac address-table | inc 0014.ff00 show ethernet-switching table | match 00:14:ff:00
clear arp-cache clear arp
show ip bgp show route protocol bgp
show ip bgp neighbors address advertised-routes show route advertising-protocol bgp address
show ip bgp regexp show route aspath-regex
clear ip bgp clear bgp neighbour
show cdp neighbors show lldp neighbors
terminal length 0 set cli screen-length 0
terminal monitor monitor start messages
terminal no monitor monitor stop
terminal shell start shell
write erase / erase startup-config load factory-default
enable password set system root-authentication plain-text-password
ip address 172.16.1.1 255.255.255.0 set interfaces ge-1/2/0 unit 0 family inet address 172.16.1.1/24
ip route 10.0.0.0 255.0.0.0 172.16.1.2 set routing-options static route 10.0.0.0/8 next-hop 172.16.1.2