Difference between revisions of "Optimizations (tuning)"

Latest revision as of 18:37, 23 August 2020

You can improving memory usage to avoid entering into conserve mode.

Session timer optimizations

config system global
  set tcp-halfclose-timer 30   [ default 120 s ]
  set tcp-halfopen-timer 10    [ default 60 s ]
  set tcp-timewait-timer 0     [ default 120 s ]
  set udp-idle-timer 40        [ default 180 s ]
end
config system session-ttl
   set default 180             [ default 300 ]
config port
  edit 0
      set protocol 17
      set timeout 10
      set end-port 53
      set start-port 53
  end
end

Reduce the FortiGuard services for the cache

config system fortiguard
  set webfilter-cache-ttl 500 [ default 3600 ]
  set antispam-cache-ttl 500  [ default 1800 ]
end

DNS cache optimization

config system dns
  set dns-cache-limit 300     [ default: 1800 ]
end

Disable options for DNS forwarding

config system dns
  unset fwdintf
end

Delete dns-udp session-helper

config system session-helper
  delete 14     [ 14 is references number for dns-udp ]
end

Reduce the maximum file size for antivirus scanning

Go to Policy > Proxy Options > Common Options > Change: Amount (bytes)

Limit the space allocated for WAN optimization to 20GB

config wanopt storage
 edit Internal
 set size 20000
end

Specify amount of disk reserved for log

config log disk setting
 set log-quota 10240

Force schedule rule to shut sessions at time (instead of keep active sessions)

config firewall policy
 edit 2 (whichever is the schedule policy)
 set schedule-timeout enable
end

Set session TTL

config firewall service custom
 edit "SSH"
   set session-ttl 600
Or you can do:
 config firewall policy
    edit 10
    set session-ttl 300

Reducing impact on new policy install

 config system settings
   set firewall-session-dirty check-new

To reduce the percentage of space allocated on the Internal disk for web caching to 80% (resulting in the amount of space for byte caching increasing to 20%)

config wanopt storage
 edit Internal
 set webcache-storage-percentage 80
end