Difference between revisions of "Basic commands"

Latest revision as of 18:47, 2 December 2020

Basic system information - Equivalent to cisco ‘show version’

get sys status
get sys performance status 

Essentials troubleshooting commands:

exec ping <destination>
exec ping-options source <origin>
exec ping6
exec traceroute <destination>
exec telnet|ssh <destination>

List network interfaces - Equivalent to cisco ‘show ip interfaces brief’

diag ip address list
get sys interface physical
get hardware nic port1
diag hard deviceinfo nic port1
get system interface transceiver port1
fnsysctl ifconfig port1

List the routing table - Equivalent to cisco ‘show ip route’

get router info routing-table all
diag ip route list

Connect to a specific VDOM (change context)

config vdom
 edit root  (or edit vdom1, or config global)

Sample network configuration with physical ports and vlans:

config system interfaces
edit port2
  set ip 163.7.131.4 255.255.255.248
  set vdom root
end
edit vlan.15
  set interface port5
  set vlanid 15
  set ip 163.7.131.4 255.255.255.248
  set vdom root
end

Setting static routes and default gateway

config router static
 edit 1
  set dst 0.0.0.0/0.0.0.0
  set gateway 192.168.0.254
  set device vlan.15
 end

Show arp table

diag ip arp list

Show arp table (in transparent mode)

diag netlink brctl list
diag netlink brctl domain <bridge_name>
diag netlink brctl name host <vdom.name>.b

Listing a firewall rule

show firewall policy 6

Disable the ‘more’ at page breaks

config sys console
  set output standard