Difference between revisions of "VPN Form"

From Tech-Wiki
Jump to: navigation, search
Line 3: Line 3:
  
 
Use this form to exchange VPN information
 
Use this form to exchange VPN information
 +
 +
One firewall (peer) will talk to the remote peer using their public IP, and exchange encrypted data (IPSec) in order to stablish the tunnel.<br>
 +
Once the tunnel is Up, the traffic will flow using their internal private address range.
 +
 +
 +
Example:
 +
10.1.50.x – 200.2.2.20 ------ (net) ----- 201.1.1.10 – 192.168.1.x:80
 +
  
  
Line 15: Line 23:
 
|colspan="2" align="center"|'''Tunnel Termination - Public Internet IP addresses'''
 
|colspan="2" align="center"|'''Tunnel Termination - Public Internet IP addresses'''
 
|-
 
|-
|Internet IP address (peer) at XXX
+
|Internet IP address (peer) at ACME
 
|200.2.2.20
 
|200.2.2.20
 
|-
 
|-
Line 21: Line 29:
 
|10.1.50.0/24
 
|10.1.50.0/24
 
|-
 
|-
|Internet IP Address (remote peer) at YYY
+
|Internet IP Address (remote peer) at BRANCH
 
|''please fill''
 
|''please fill''
 
|-
 
|-
 
|Partner Internal Network
 
|Partner Internal Network
|''please fill'' (if your network overlaps the network above, it will clash)
+
|''please fill'' (if your network overlaps the network above, it will clash, thus should be nat'ed)
 
|-
 
|-
 
|colspan="2" align="center"|'''IKE Policy (Phase 1)'''
 
|colspan="2" align="center"|'''IKE Policy (Phase 1)'''

Revision as of 15:53, 7 June 2018

Back to Firewalls

Use this form to exchange VPN information

One firewall (peer) will talk to the remote peer using their public IP, and exchange encrypted data (IPSec) in order to stablish the tunnel.
Once the tunnel is Up, the traffic will flow using their internal private address range.


Example: 10.1.50.x – 200.2.2.20 ------ (net) ----- 201.1.1.10 – 192.168.1.x:80


VPN Form

Table 1. VPN Form
Parameter Value
Tunnel Termination - Public Internet IP addresses
Internet IP address (peer) at ACME 200.2.2.20
Internal Network 10.1.50.0/24
Internet IP Address (remote peer) at BRANCH please fill
Partner Internal Network please fill (if your network overlaps the network above, it will clash, thus should be nat'ed)
IKE Policy (Phase 1)
IKE Version ( ) IKEv1 (x) IKEv2
IKE Encryption Policy (x) AES 256 ( ) 3DES (156-bit)
IKE Authentication Policy (x) SHA1 ( ) MD5
IKE Lifetime (default 86400s = 1day) 86400 sec
Diffie-Hellman Group ( ) Group 1 (x) Group 2 ( ) Group 5 ( ) Group 14
Identity (IP address or hostname) N/A
Authentication (x) Pre-shared Key ( ) PKI
Mode (Main recommended) (x) Main ( ) Aggressive
Pre-Shared Key Note: do not use unencrypted emamil to exchange pre-shared keys
Pre-shared Key exchange ( ) PGP ( ) Phone call (x) TXT/SMS ____________
IPSEC Policy (Phase 2)
IPSEC Encryption Algorithm ( ) ESP-3DES (x) ESP-AES128 ( ) ESP-AES256
IPSEC Data Integrity (x) SHA ( ) MD5
Perfect Forward Secrecy (PFS) ( ) Off ( ) Group 1 (x) Group 2 ( ) Group 5
IPSEC SA Lifetime - Seconds 3600 seconds
IPSEC SA Lifetime - Kilobytes _____KB (x) Disabled