Difference between revisions of "Performing an upgrade"

From Tech-Wiki
Jump to: navigation, search
Line 16: Line 16:
  
 
Generate qkviw via ''System - Support''
 
Generate qkviw via ''System - Support''
 +
 
Upload qkview to [https://ihealth.f5.com/ F5 iHealth]
 
Upload qkview to [https://ihealth.f5.com/ F5 iHealth]
  

Revision as of 17:24, 29 March 2021

Back to Misc

Upgrade procedure covering HA units:


reactivate license on System - License - Re-activate

Test both admin/root passwords

Commit/Save configuration

 tmsh save sys config

Save a UCS backup file

 tmsh save sys ucs $(echo $HOSTNAME | cut -d'.' -f1)-$(date +%H%M-%m%d%y)

Generate qkviw via System - Support

Upload qkview to F5 iHealth

Import new software image via System - Software management - Image list

Disable ConfigSync

 tmsh cm modify device-group <device_group> auto-sync


Set the Force Offline option on standby unit

Upgrade standby into a new volume (name will be appended to HD name) via System - Software management - Image list - Install

Select (activate) the boot location of the newly installed software as active and reboot standby

After boot, unset the Force Offline option

Use network failover to make standby as primary


Set the Force Offline option on other node

Upgrade former primary via System - Software management - Image list - Install

Select (activate) the boot location of the newly installed softare as active and reboot standby

After boot, unset the Force Offline option

unset the Force Offline option