Difference between revisions of "Cisco IOS command's equivalent in JUNOS"

Revision as of 15:33, 4 February 2020

Essentials JUNOS commands and its IOS counterpart

*Table 1. JUNOS Commands*
Cisco Command	JUNOS Equivalent
ping address	ping address rapid
show clock	show system uptime
clock set	set date
show environment	show chassis environment
show ip traffic	show system statistics
show processes cpu	show system processes
show running-config	show configuration
show tech-support	request support information
show ip interface brief	show interfaces terse
show ip route	show route
write memory	commit
show route-map	show policy
clear counters	clear interface statistics
clear arp-cache	clear arp
show ip bgp	show route protocol bgp
show ip bgp neighbors address advertised-routes	show route advertising-protocol bgp address
show ip bgp regexp	show route aspath-regex
clear ip bgp	clear bgp neighbour
reload	request system reboot
terminal length 0	set cli screen-length 0
terminal monitor	monitor start messages
terminal no monitor	monitor stop
write erase / erase startup-config	load factory-default
enable password	set system root-authentication plain-text-password
ip address 172.16.1.1 255.255.255.0	set interfaces ge-1/2/0 unit 0 family inet address 172.16.1.1/24
ip route 10.0.0.0 255.0.0.0 172.16.1.2	set routing-options static route 10.0.0.0/8 next-hop 172.16.1.2

@@ Line 78: / Line 78: @@
 |write erase / erase startup-config
 |load factory-default
+|-
+|enable password
+|set system root-authentication plain-text-password
 |-
 |ip address 172.16.1.1 255.255.255.0