Difference between revisions of "Adding and extending disks/volumes in LVM"
From Tech-Wiki
| Line 29: | Line 29: | ||
# resize2fs /dev/vg_root/vol1 | # resize2fs /dev/vg_root/vol1 | ||
| − | + | Check the current size used again size using: | |
| − | + | ||
# vgdisplay | # vgdisplay | ||
| + | # lvdisplay | ||
Revision as of 17:00, 15 August 2017
In order to use LVM, the partition must be type 8e instead of 83 when created by fdisk.
Create new PV (Physical Volume) using following command:
# pvcreate /dev/sdb1
Verify the volume:
# pvs # vgdisplay
Extend the volume group in a new disk:
# vgextend vg_root /dev/sdb1
This can be used to span this volume across a second disk
Check the new size:
# vgs # pvscan
Get the current available size and logical volume name using:
# vgdisplay # lvdisplay
Increase the size of this logical volume using: (if the volume has already grown using all the space in the new disk, this is not required)
# lvextend -L +100G /dev/vg_root/vol1
In addition, it's required to increase the file system in this logical volume as well:
# resize2fs /dev/vg_root/vol1
Check the current size used again size using:
# vgdisplay # lvdisplay