Difference between revisions of "Cisco IOS command's equivalent in JUNOS"
From Tech-Wiki
| Line 52: | Line 52: | ||
|clear interface statistics | |clear interface statistics | ||
|- | |- | ||
| − | |sh ip arp | + | |sh ip arp {{{targ|}}} inc 10.0.0.1 |
| − | |show arp no-resolve | + | |show arp no-resolve {{{targ|}}}find 10.0.0.1 |
|- | |- | ||
|clear arp-cache | |clear arp-cache | ||
Revision as of 13:20, 30 March 2021
Essentials JUNOS commands and its IOS counterpart
| Cisco Command | JUNOS Equivalent |
|---|---|
| ping address | ping address rapid |
| enable | configure |
| show clock | show system uptime |
| clock set | set date |
| show environment | show chassis environment |
| show ip traffic | show system statistics |
| show processes cpu | show system processes |
| show running-config | show configuration |
| show tech-support | request support information |
| show ip interface brief | show interfaces terse |
| show ip route | show route |
| write memory | commit |
| show route-map | show policy |
| clear counters | clear interface statistics |
| sh ip arp inc 10.0.0.1 | show arp no-resolve find 10.0.0.1 |
| clear arp-cache | clear arp |
| show ip bgp | show route protocol bgp |
| show ip bgp neighbors address advertised-routes | show route advertising-protocol bgp address |
| show ip bgp regexp | show route aspath-regex |
| clear ip bgp | clear bgp neighbour |
| reload | request system reboot |
| terminal length 0 | set cli screen-length 0 |
| terminal monitor | monitor start messages |
| terminal no monitor | monitor stop |
| write erase / erase startup-config | load factory-default |
| enable password | set system root-authentication plain-text-password |
| ip address 172.16.1.1 255.255.255.0 | set interfaces ge-1/2/0 unit 0 family inet address 172.16.1.1/24 |
| ip route 10.0.0.0 255.0.0.0 172.16.1.2 | set routing-options static route 10.0.0.0/8 next-hop 172.16.1.2 |