Windows NTP Setup

From Tech-Wiki
Revision as of 09:17, 24 August 2016 by Linogenco (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Back to Misc


Registry: 

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters

When the synchronization type is set to "NT5DS", Windows Time Service synchronizes its time resource with the network domain controller. Alternatively, setting the type attribute to "NTP" configures Windows Time Service to synchronize with a specified NTP time server. The NTP server is specified by either its Domain Name System (DNS) name or its IP address these are specified using the "NtpServer" value name.

To set manually: 

w32tm /config /manualpeerlist:10.10.10.10 10.10.10.11
w32tm /config /syncfromflags:MANUAL

Then sync: 

w32tm /resync
or
net stop w32time
net start w32time

To check: 

w32tm /dumpreg /subkey:parameters
w32tm /monitor /computers:localhost
w32tm /stripchart /computer:<hostname of domain controller>
+offset means server is ahead of pc, - server is behind pc
Retrieved from ‘http://tech-wiki.net/index.php?title=Windows_NTP_Setup&oldid=800’