Cisco command's equivalent in JUNOS
From Tech-Wiki
Revision as of 22:09, 9 October 2016 by Fabricio.Lima (Talk | contribs)
Essentials JUNOS commands and its IOS counterpart
Cisco Command | JUNOS Equivalent | |
---|---|---|
ping address | ping address rapid | |
show clock | show system uptime | |
clock set | set date | |
show environment | show chassis environment | |
show ip traffic | show system statistics | |
show processes | show system processes | |
show running-config | show configuration | |
show tech-support | request support information | |
show ip interface brief | show interfaces terse | |
show ip route | show route | |
write memory | commit | |
show route-map | show policy | |
clear counters | clear interface statistics | |
clear arp-cache | clear arp | |
show ip bgp | show route protocol bgp | |
show ip bgp neighbors address advertised-routes | show route advertising-protocol bgp address | |
show ip bgp regexp | show route aspath-regex | |
clear ip bgp | clear bgp neighbour | |
reload | request system reboot | |
terminal length 0 | set cli screen-length 0 | |
terminal monitor | monitor start messages | |
terminal no monitor | monitor stop | |
write erase / erase startup-config | load factory-default | |
interface fastethernet0/1 | ip address 172.16.1.1 255.255.255.0 | set interfaces ge-1/2/0 unit 0 family inet address 172.16.1.1/24 |
ip route 192.168.1.0 255.255.255.0 172.16.1.2 | set routing-options static route 192.168.1.0/24 next-hop 172.16.1.2 |