EtherChannel

From Tech-Wiki
Revision as of 15:45, 7 September 2017 by Fabricio.Lima (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


The command below allows to create a Port Aggregation on Cisco devices (EtherChannel) 

Switch1# configure terminal 
Switch1(config)# interface range FastEthernet0/11 - 12 
Switch1(config-if-range)# switchport mode access
Switch1(config-if-range)# switchport access vlan 10
Switch1(config-if-range)# channel-group 5 mode desirable
Retrieved from ‘http://tech-wiki.net/index.php?title=EtherChannel&oldid=1023’