Difference between revisions of "Troubleshooting Tips"

Latest revision as of 14:56, 22 March 2019

If you are facing strange behavior, in an advanced/illogic scenario, evaluate/review the following items in this order:

Policy
NAT (correct NAT mode? Does it require manual proxy arp?)
Routing
Anti-spoofing (even from return packet, check logs in opposite direction)
VPN Encryption domain (for your and remote peer)
IPS (Use command: ips off)
Connection Limit (fw ctl pstat)
Disable SecureXL (Use command: fwaccel off)
Test in the other cluster member (Use command: clusterXL_admin down –p)
Issue a cpstop/cpstart or reboot
Consider installing the latest Jumbo hotfix accumulator or Recommended Hotfixes (per sk106162 and sk106389)
Did I forget something?!
That’s probably a bug, raise a TAC

Confirm the reason of your packet being dropped using:

 fw ctl zdebug + drop | grep 'x.x.x.x\|y.y.y.y'

If log is stuck with existing old sessions (no new logs, or still showing traffic from previous policies), clear connection's table:

 fw tab -t connections -x

@@ Line 20: / Line 20: @@
    fw ctl zdebug + drop | grep 'x.x.x.x\|y.y.y.y'
-If Tracker is stuck with existing session (no new logs) and behavior is from previous policy push, clear connection's table:
+If log is stuck with existing old sessions (no new logs, or still showing traffic from previous policies), clear connection's table:
    fw tab -t connections -x