Listing all tables on a gateway
From Tech-Wiki
More actions
Check Point firewall kernel-table reference retained for expert troubleshooting.
Validation status
Reviewed against current Check Point CLI documentation on 27 September 2026.
Do not flush kernel tables casually
Kernel-table modification can disrupt live traffic/state. Inspect first and use destructive table operations only with release-specific guidance and approval.
Original technical reference
While running, the firewall creates, keeps and updates various tables it needs for correct functioning.
These tables contain parameters that are mostly of use for firewall itself, but you can query them on the cli, sometimes even flush them as well.
To list all tables use the following command:
fw tab | grep "\-\-\-\-\-\-\-"
Tables of interest are:
- connections